Daily Maintenance Of Marble

      Spray a small amount of crystal surface care agent or crystal hard powder on the clean or washed floor with polishing pad (if 300-400 rpm high-speed machine is better) 1-2 times a week (crystal hard powder must be added with water) , The amount of water depends on the humidity, and the amount of water should be more when the weather is dry.) 1-2 grams per square meter.

　　 Spread evenly with a stone care machine, and then polish it with polishing pad until it is bright. Finally, use the dust pusher to push the dust on the ground clean. Should be sprayed in sections, each section of 1-2 square meters. The scouring pad should be kept clean. When it is stained with too much powder, it will affect the effect; if it is found to be stained, it must be used on the other side until both sides are stained and replaced with a new one. Depending on the working area, bring enough scouring pads, and clean and dry the contaminated ones before use.

   On a smooth dark ground, the polishing pad can be replaced with a steel wool pad for better effect, but it should be noted that the ground is not smooth or the steel wool pad is stained will make the ground black.

Precautions

　　 1. The stone surface should be dry and smooth. After renovation, use animal hair pads or nano wool pads as much as possible to dry the ground temperature to about 50 degrees, and then do crystal surface treatment.

　　2. Use clean steel wool and polishing pad.

　　3. Get ready when you see it, and stop the machine immediately when the stone emits glass light.

　　4. It is best to use neutral crystal faceting agent and neutral refurbished pulp.

　　 Stone daily maintenance crystal hardening treatment: This is the best maintenance method, as long as the conditions can be achieved, this method should be used as much as possible.

　　 Tools and materials: stone care machine (floor scrubbing machine), red scouring pad, watering can, dust pusher, crystal surface maintenance agent, crystal hard powder.