Introduction to Abrasive Brush Tools

The Abrasive bbrush includes a base. There are several installation grooves on one side of the base. Grinding wires are respectively fixed in the grooves. The other side of the base is provided with a fixed boss. When grinding the stone surface, the abrasive bbrush can The ends of each grinding wire are in contact with the stone surface respectively, so that the grinding brush and the grinding surface of the stone are dispersed, and the grinding brush is fixed on the pendulum rod of the grinding machine through the fixed boss provided on one side, and the grinding brush follows the The different swing directions of the pendulum rod form the required grinding marks on the stone surface. When changing the groove form of the installed grinding wire and the thickness of the installed grinding wire, the stone surface can achieve different grinding effects such as convex and concave, antique and matte.

The production of aabrasive bbrush is to cut the steel shaft into a suitable size, turn the blank on the machine tool, weld, reinforce, straighten, and then make the roll core prototype through the lathe; Sleeve or put into the mold for direct injection, in this way, the basic shape of a brush roller body has been formed. The roll body blank after injection molding or casing is finely machined on the machine tool according to the size required by the drawing, and subsequent processing is carried out according to different process requirements, such as fine grinding of the rubber-coated roll core, and the shaft head needs to be made different. keyway or interface.